Appendix B — Default Settings
156 PD43 and PD43c Commercial Printer User Manual
Error Alerts
Error alerts are sent when a condition occurs that prevents the printer
from printing, such as running out of media. These alerts include:
• Out of Media
• Out of Ribbon
• Printer in Pause Mode
• Printer in Menu Mode
• Application Break
• RFID Not Installed
• Printhead Lifted
• Printhead Not Detected
Information Alerts
Information alerts are sent when a print job is started or completed, or
when the printer is rebooting. These alerts include:
• Print Job Complete
• Printer is Rebooting
• Started (Sent when a print job has begun)
Warning Alerts
Warning alerts are sent when the printer may need attention shortly,
such as when the printhead needs maintenance, or when the odometer
has reached a present value. A warning alert is also sent when the
printer firmware is being upgraded. Warning alerts include:
• Ribbon Installed (Sent when the printer is set for direct thermal
printing but has ribbon installed for thermal transfer printing)
• Ribbon Low
• Upgrading Firmware
• Odometer (User Resettable)
• Odometer (Printer)
• Replace Printhead
• Clean Printhead
To Next Page
Loading...
Need help?
General