Chapter 3 — Connect the Printer
PD43 and PD43c Commercial Printer User Manual 91
About the USB Host Port
You can use the USB host interface port on the printer to connect these
peripheral devices:
You can also connect a peripheral device through the USB-to-Serial or
USB-to-Parallel adapter cable accessories. For information, contact
your local sales representative.
USB Peripheral Devices
Device Description
Keyboard Use a standard USB keyboard to send Fingerprint
printer language commands directly to the printer or to
enter information if you are running a Smart Printing
application.
Bar code scanner Use Intermec USB bar code scanners for data input with
a Smart Printing application. The printer also supports
other USB scanners that use a generic keyboard driver.
USB storage device Use a USB storage device to load applications,
configuration files, fonts, and images into the printer
memory, or to perform firmware upgrades. You can also
save configuration files to a USB storage device for
upload to a printer. The USB storage device must have
a single partition and be formatted as FAT16 or FAT32.
To Next Page
Loading...
Need help?
General