Chapter 4 — Configure the Printer
100 PD43 and PD43c Commercial Printer User Manual
About Printer Profiles
After you change printer default settings to meet your needs, you can
save those settings as a printer profile. The printer supports multiple
profiles that you can save and load at any time. For example, you can
create one profile to use when you are printing on continuous label
stock, and a different profile to use when you are printing on label
stock with gaps.
The following printer settings are not saved in a profile:
• IP address for either IPv4 or IPv6 networks
• Media calibration settings for the label stop sensor
• Remote port or remote host values for a remote computer
accessing the printer through raw TCP
Save a Printer Profile from the Web Page
From the printer web page, you can save the current settings as a
profile that you can load from the printer memory at any time.
1 In the printer web page, click the Configure tab.
2 Click System Settings > General.
3 Click Save As Profile. The Save As Profile screen appears.
4 Enter a name in the Profile field, and then click Save.
Note: This procedure assumes you have already logged in to the
printer web page.
To Next Page
Loading...
Need help?
General