Appendix B — Default Settings
152 PD43 and PD43c Commercial Printer User Manual
Default Configuration
Use this appendix to view the default settings on the printer. The
following tables list the default settings for the printers. If you restore
the printer to factory default settings, it will use the values listed here.
The order of the settings reflects the organization of the printer web
page and Main Menu.
Bluetooth Settings
This section describes Bluetooth settings for the printer. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Bluetooth.
• From the printer web page, click the Configure tab,
Communications > Bluetooth.
Bluetooth Settings
Setting Description Default
Security Selects the level of security that is used
when pairing devices to the printer. If you
select Authentication, you must enter a
passkey. If you select Auth + Encrypt, you
must enter a passkey and traffic is
encrypted.
Disable
Device
Name
Sets the name that identifies the printer in
the Bluetooth network. Maximum length
is 16 characters.
Printer model
number and serial
number. For
example,
PD43A030000100.
Discover Determines if other Bluetooth devices can
detect the printer.
Enable
Passkey Sets the passkey that is used when pairing
Bluetooth devices to the printer. Range is 1
to 16 characters (case-sensitive).
1234
Reserve Determines if the printer is exclusively
reserved for one Bluetooth device. The
first Bluetooth device that connects with
the printer locks out any other connection
attempts.
Disable
To Next Page
Loading...
Need help?
General