Honeywell Intermec PD43 User Manual

Appendix B — Default Settings
166 PD43 and PD43c Commercial Printer User Manual
System Network Services
This section lists the network services you can manage from the
printer. You will only see Manage Services from the menus if you have
an Ethernet or Wireless module installed in the printer. To view these
services:
• From the printer Main Menu, select Settings > System Settings >
Manage Services.
• From the printer web page, click the Configure tab, System
Settings > Manage Services.
System Network Services
Service Description Default
Web Server Determines if the web server is enabled in the
printer.
Enable
FTP Determines if the printer can use File Transfer
Protocol (FTP).
Enable
Avalanche Determines if the printer can be managed by
Wavelink Avalanche.
Enable
Net1 Determines if the printer can use Telnet to
communicate with Fingerprint.
Enable
SmartSystems Determines if the printer can be managed by
Intermec SmartSystems Foundation.
Enable
SNMP Determines if the printer can use SNMP. Enable
LPR Determines if the printer can use the line printer
server (LPR) daemon.
Enable
IKEv2 Determines if the printer can use IKEv2. Disable
SSH Determines if the printer can use Secure Socket
Handling (SSH).
Enable
Telnet Determines if the printer can use Telnet. Enable
XML Determines if the printer can use XML printing. Enable

Honeywell Intermec PD43 Specifications

General

Brand	Honeywell
Model	Intermec PD43
Category	Printer
Language	English