Honeywell Intermec PD43 User Manual

Appendix B — Default Settings
PD43 and PD43c Commercial Printer User Manual 159
Media Settings
This section describes media settings for the printer. To view these
settings:
• From the printer Main Menu, select Settings > Printing > Media.
• From the printer web page, click the Configure tab, Printing >
Media.
Note: If you are using an icon printer that is not on a network, you
need to use PrintSet 5 through a USB connection to configure media
settings.
Media Settings
Setting Description Default
Media Type Selects the type of media that is loaded in
the printer.
Media With
Gaps
Print Method Selects the method of printing that the
printer is using.
Ribbon (TTR)
for thermal
transfer
printers, or No
Ribbon (DT)
for direct
thermal
printers
Media Margin
(X)
Sets the width of the margin from the left
edge of the label along the printhead to the
edge of the printable area. Unit of
measurement is defined in the Unit of
Measurement parameter.
Variable
*935-044-001*
INTERMEC
6001 36th Ave W
9
.FEJB
NBSHJO

Honeywell Intermec PD43 Specifications

General

Brand	Honeywell
Model	Intermec PD43
Category	Printer
Language	English