Honeywell Intermec PD43 User Manual

Chapter 1 — About the Printers
12 PD43 and PD43c Commercial Printer User Manual
About the Ready Screen
After you turn the printer on, the Ready screen appears when the
printer finishes starting up.
Ready Screen
By default, the bottom of the screen shows the printer command
language, the IP address, and the time and date. You can customize the
screen as necessary to show different kinds of information.
The status bar at the top of the screen includes these information and
status icons:
Fingerprint
10.200.27.89
01/04/2014
12:00
Ready
Note: Icons for Wi-Fi and Bluetooth status appear only when the
optional Wi-Fi/Bluetooth module is installed. The IP address appears
when the printer is connected to an Ethernet or wireless network and
the Idle Information parameter is set to IPv4 address.
Information and Status Icon Descriptions
Icon Description
Printer Information icon. Select this icon to view basic printer
information.

Honeywell Intermec PD43 Specifications

General

Brand	Honeywell
Model	Intermec PD43
Category	Printer
Language	English