Honeywell Intermec PD43 User Manual

Appendix B — Default Settings
PD43 and PD43c Commercial Printer User Manual 169
Wireless 802.11 Network Settings
This section describes the 802.11 IPv4 and IPv6 settings. To view these
settings:
• From the printer Main Menu, select Settings > Communications
> Wireless 802.11 > Network > IPv4 or IPv6.
• From the printer web page, click the Configure tab,
Communications > Wireless 802.11.
Wireless 802.11 Network Settings
Setting Description Default
(IPv4) IP
Assignment
Method
Sets how the printer obtains an IP
address (for IPv4 networks).
DHCP
(IPv4) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv4 network.
0.0.0.0
Subnet Mask Sets a number that defines the range of
IP addresses that can be used in an IPv4
network.
0.0.0.0
Default Router Sets the IP address of a router that is
used when a device sends a packet to
another subnet or to an unknown
destination.
0.0.0.0
DHCP Response Sets if the printer receives DHCP
responses by broadcast or unicast.
Broadcast
(IPv6) IP
Assignment
Method
Sets how the printer obtains an IP
address (for IPv6 networks).
Automatic
(IPv6) IP Address Sets the unique network-level address
that is assigned to each device in an
IPv6 network.
Automatic

Honeywell Intermec PD43 Specifications

General

Brand	Honeywell
Model	Intermec PD43
Category	Printer
Language	English