HP MSR SERIES Command Reference

133
Views
System view
Predefined user roles
network-admin
Parameters
time-value: Sets the SmartOn client timeout timer. The value range is 10 to 120, in seconds.
Usage guidelines
The SmartOn client timeout timer starts when the device sends an EAP-Request/Notification packet to the
client. If the device does not receive any EAP-Response/Notification packets from the client within the
timer interval, it retransmits the EAP-Request/Notification packet. After the device has made the
maximum retransmission attempts but received no response, it stops the 802.1X authentication process
for the client.
Examples
# Set the SmartOn client timeout timer to 20 seconds.
<Sysname> system-view
[Sysname] dot1x smarton timer supp-timeout 20
Related commands
• display dot1x
• dot1x smarton retry
dot1x timer
Use dot1x timer to set 802.1X timers.
Use undo dot1x timer to restore the defaults.
Syntax
dot1x timer { handshake-period handshake-period-value | quiet-period quiet-period-value |
reauth-period reauth-period-value | server-timeout server-timeout-value | supp-timeout
supp-timeout-value | tx-period tx-period-value }
undo dot1x timer { handshake-period | quiet-period | reauth-period | server-timeout | supp-timeout
| tx-period }
Default
The following timers apply:
• Handshake timer: 15 seconds.
• Quiet timer: 60 seconds.
• Periodic reauthentication timer: 3600 seconds.
• Server timeout timer: 100 seconds.
• Client timeout timer: 30 seconds.
• Username request timeout timer: 30 seconds.
Views
System view

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English