HP MSR SERIES Command Reference

426
Syntax
ssl server-policy policy-name
undo ssl server-policy policy-name
Default
No SSL server policy exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies a name for the SSL server policy, a case-insensitive string of 1 to 31 characters.
Usage guidelines
This command creates an SSL server policy for which you can configure SSL parameters such as a PKI
domain and supported cipher suits. An SSL server policy takes effect only after it is associated with an
application such as HTTPS.
Examples
# Create SSL server policy policy1 and enter SSL server policy view.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1]
Related commands
display ssl server-policy
SSL client policy configuration commands
display ssl client-policy
Use display ssl client-policy to display SSL client policy information.
Syntax
display ssl client-policy [ policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy-name: Specifies an SSL client policy by its name, a case-insensitive string of 1 to 31 characters. If
you do not specify this argument, the command displays information about all SSL client policies.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English