HP MSR SERIES Command Reference

136
reset dot1x guest-vlan
Use reset dot1x guest-vlan to remove users from the 802.1X guest VLAN on a port.
Syntax
reset dot1x guest-vlan interface interface-type interface-number [ mac-address mac-address ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
mac-address mac-address: Specifies the MAC address of an 802.1X user in the guest VLAN.
Examples
# Remove the 802.1X user with MAC address 1-1-1 from the 802.1X guest VLAN on port GigabitEthernet
2/1/1.
<Sysname> reset dot1x guest-vlan interface gigabitethernet 2/1/1 mac-address 1-1-1
Related commands
dot1x guest-vlan
reset dot1x statistics
Use reset dot1x statistics to clear 802.1X statistics.
Syntax
reset dot1x statistics [ interface interface-type interface-number ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If you do not specify
a port, this command clears 802.1X statistics on all ports.
Examples
# Clear 802.1X statistics on GigabitEthernet 2/1/1.
<Sysname> reset dot1x statistics interface gigabitethernet 2/1/1
Related commands
display dot1x

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English