HP MSR SERIES Command Reference

602
Totally 3 blacklist entries.
Table 94 Command output
Field Descri
p
tion
IPv6 address IPv6 address of the blacklist entry.
VPN instance
MPLS L3VPN instance to which the blacklisted IPv6 address belongs. If the
blacklisted IPv6 address is on the public network, this field displays hyphens
(--).
Type Type of the IPv6 blacklist entry, Manual or Dynamic.
TTL(sec)
Remaining aging time of the IPv6 blacklist entry, in seconds. If no aging time
is set for the entry, this field displays Never.
Dropped Number of dropped packets destined for the IPv6 address.
Totally 3 blacklist entries Total number of IPv6 blacklist entries.
Related commands
blacklist ipv6
display client-verify protected ip
Use display client-verify protected ip to display protected IPv4 addresses for client verification.
Syntax
MSR1000/MSR2000/MSR3000:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ count ]
MSR4000:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dns: Specifies the DNS client verification function.
http: Specifies the HTTP client verification function.
tcp: Specifies the TCP client verification function.
ip-address: Specifies a protected IPv4 address. If no IPv4 address is specified, this command displays all
matching protected IPv4 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the protected IPv4
address belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the protected IPv4 address is on the public network.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English