HP MSR SERIES Command Reference

456
tftp UDP 69
Table 61 Command output
Field Description
Application Application protocol using the port mapping.
Protocol Transport layer protocol.
Port
Port number to which the application protocol is
mapped.
Related commands
• display port-mapping
• port-mapping
display port-mapping user-defined
Use display port-mapping user-defined to display information about the user-defined port mappings.
Syntax
display port-mapping user-defined [ application application-name | port port-number ]
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
application application-name: Specifies an application protocol by its name, a case-insensitive string of
1 to 63 characters.
port port-number: Specifies a port by its number, in the range of 0 to 65535.
Usage guidelines
If you do not specify an application protocol or a port number, this command displays all user-defined
port mappings on the device.
Examples
# Display all user-defined port mappings on the device.
<Sysname> display port-mapping user-defined
Application Port Protocol Match Type Match Condition
-------------------------------------------------------------
FTP 21 TCP --- ---
FTP 21 UDP IPv4 host 10.10.10.1(vpn1)
FTP 2121 UDP IPv4 host [11.10.10.1, 11.10.10.10](vpn2)
FTP 21 UDP IPv4 subnet 10.10.10.1/24
FTP 21 SCTP IPv6 host 2000:fdb8::1:00ab:853c:39ab
HTTP 899 TCP IPv4 ACL 3002
HTTP 999 SCTP IPv6 ACL 3002

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English