HP MSR SERIES Command Reference

409
• Specify the loopback interface as the source interface.
• Specify the IPv6 address of the loopback interface as the source IPv6 address.
interface interface-type interface-number: Specifies a source interface by its type and number. The IPv6
address of this interface is the source IPv6 address of the IPv6 SCP packets.
ipv6 ipv6-address: Specifies a source IPv6 address.
Usage guidelines
In publickey authentication, the client must get the local private key for digital signature. Because the
publickey authentication uses either RSA or DSA algorithm, you must specify an algorithm by using the
identity-key keyword. In this way, the client can get the correct local private key.
Examples
# Connect an SCP client to the SCP server 2000::1. Specify the public key of the server as svkey, and
download the file abc.txt from the server. The SCP client uses publickey authentication. Use the following
algorithms:
• Preferred key exchange algorithm is dh-group14.
• Preferred server-to-client encryption algorithm is aes128.
• Preferred client-to-server HMAC algorithm is sha1.
• Preferred server-to-client HMAC algorithm is sha1-96.
• Preferred compression algorithm between the server and client is zlib.
<Sysname> scp ipv6 2000::1 get abc.txt prefer-kex dh-group14 prefer-stoc-cipher aes128
prefer-ctos-hmac sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib publickey svkey
sftp
Use sftp to establish a connection to an IPv4 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey keyname | source { interface interface-type interface-number
s | ip ip-address } ] *
In FIPS mode:
sftp server [ port-number ] [ vpn
-instance vpn-instance-name ] [ identity-key rsa | prefer-compress zlib
| prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14
| prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname
| source { interface interface-type interface-number s | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English