446
Parameters
group-description: Configures a description for the user-defined application group. It is a case-sensitive
string of 1 to 127 characters. Spaces are allowed.
Examples
# Configure a description for the application group aaa.
<Sysname> system-view
[Sysname] app-group aaa
[Sysname-app-group-aaa] description User defined aaa group
Related commands
app-group
display app-group
Use display app-group to display information about the specified application groups.
Syntax
display app-group [ name group-name | pre-defined | user-defined ]
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
name group-name: Specifies an application group by its name. The group-name argument is a
case-insensitive string of 1 to 63 characters.
pre-defined: Specifies the predefined application groups.
user-defined: Specifies the user-defined application groups.
Usage guidelines
If you do not specify any parameters, this command displays information about all application groups.
Examples
# Display information about all user-defined application groups.
<Sysname> display app-group user-defined
Group name Type Group ID
g1 User-defined 0x80000001
g1234 User-defined 0x80000003
g2 User-defined 0x80000002
g234 User-defined 0x80000004
# Display information about all pre-defined application groups.
<Sysname> display app-group pre-defined
Group name Type Group ID
authentication Pre-defined 0x00000010
database Pre-defined 0x00000003
To Next Page
Loading...
Need help?
General
