HP MSR SERIES Command Reference

490
Default
No connection limit policy exists.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies a connection limit policy by its ID, in the range of 1 to 32. An IPv4 or IPv6 connection
limit policy has its own number.
Examples
# Create IPv4 connection limit policy 1 and enter its view.
<Sysname> system-view
[Sysname] connection-limit policy 1
[Sysname-connlmt-policy-1]
# Create IPv6 connection limit policy 12 and enter its view.
<Sysname> system-view
[Sysname] connection-limit ipv6-policy 12
[Sysname-connlmt-ipv6-policy-12]
Related commands
• connection-limit apply
• connection-limit apply global
• display connection-limit
• limit
display connection-limit
Use display connection-limit to display information about connection limit policies.
Syntax
display connection-limit { ipv6-policy | policy } { policy-id | all }
Views
User view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English