HP MSR SERIES Command Reference

413
Related commands
display sftp client source
sftp ipv6
Use sftp ipv6 to connect an SFTP client to an IPv6 SFTP server and enter SFTP client view.
Syntax
In non-FIPS mode:
sftp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type interface-number ]
[ identity-key { dsa | rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes256 | des }
| prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1
| dh-group14 } | prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 |
md5-96 | sha1 | sha1-96 } ] * [ dscp dscp-value | publickey keyname | source { interface interface-type
interface-number | ipv6 ipv6-address } ] *
In FIPS mode:
sftp ipv6 server [ port-number ] [ vpn-instance vpn
-instance-name ] [ -i interface-type interface-number ]
[ identity-key rsa | prefer-compress zlib | prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac
{ sha1 | sha1-96 } | prefer-kex dh-group14 | prefer-stoc-cipher { aes128 | aes256 } | prefer-stoc-hmac
{ sha1 | sha1-96 } ] * [ publickey keyname | source { interface interface-type interface-number | ipv6
ipv6-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv6 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs, where
the vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
-i interface-type interface-number: Specifies an output interface by its type and number for IPv6 SFTP
packets. The specified output interface must have a link-local address. This option is used when the server
uses a link-local address to provide the SFTP service for the client.
identity-key: Specifies a public key algorithm for the client, either dsa or rsa. The default is dsa. If the
server uses publickey authentication, this keyword must be specified.
• dsa: Specifies the public key algorithm dsa.
• rsa: Specifies the public key algorithm rsa.
prefer-compress: Specifies the preferred compression algorithm between the server and the client. By
default, compression is not supported.
zlib: Specifies the compression algorithm zlib.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English