HP MSR SERIES Command Reference

489
connection-limit apply global
Use connection-limit apply global to apply a connection limit policy globally.
Use undo connection-limit apply global to remove the application.
Syntax
connection-limit apply global { ipv6-policy | policy } policy-id
undo connection-limit apply global { ipv6-policy | policy }
Default
No connection limit policy is applied globally.
Views
System view
Predefined user roles
network-admin
Parameters
ipv6-policy: Specifies an IPv6 connection limit policy.
policy: Specifies an IPv4 connection limit policy.
policy-id: Specifies the ID of a connection limit policy in the range of 1 to 32.
Usage guidelines
Only one IPv4 connection limit policy and one IPv6 connection limit policy can be applied globally. A
new IPv4 or IPv6 connection limit policy overwrites the old one.
Examples
# Apply the IPv4 connection limit policy 1 globally.
<Sysname> system-view
[Sysname] connection-limit apply global policy 1
# Apply the IPv6 connection limit policy 12 globally.
<Sysname> system-view
[Sysname] connection-limit apply global ipv6-policy 12
Related commands
• connection-limit
• limit
connection-limit
Use connection-limit to create a connection limit policy and enter its view.
Use undo connection-limit to remove the configuration.
Syntax
connection-limit { ipv6-policy | policy } policy-id
undo connection-limit { ipv6-policy | policy } policy-id

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English