HP MSR SERIES Command Reference

13
radius-scheme radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of
1 to 32 characters.
Usage guidelines
You can specify one primary authentication method and multiple backup authentication methods.
When the primary method is invalid, the device attempts to use the backup methods in sequence. For
example, the authentication login radius-scheme radius-scheme-name local none command specifies the
default primary RADIUS authentication method and two backup methods (local authentication and no
authentication). The device performs RADIUS authentication by default and performs local
authentication when the RADIUS server is invalid. The device does not perform authentication when both
of the previous methods are invalid.
Examples
# Configure ISP domain test to use local authentication for login users.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login local
# Configure ISP domain test to use RADIUS scheme rd for login users and use local authentication as the
backup.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] authentication login radius-scheme rd local
Related commands
• authentication default
• hwtacacs scheme
• ldap scheme
• local-user
• radius scheme
authentication portal
Use authentication portal to specify the authentication method for portal users.
Use undo authentication portal to restore the default.
Syntax
In non-FIPS mode:
authentication portal { ldap-scheme ldap-scheme-name [ local ] [ none ] | local [ none ] | none |
radius-scheme radius-scheme-name [ local ] [ none ] }
undo authentication portal
In FIPS mode:
authentication portal { ldap-scheme ldap-scheme-name [ local ] | local | radius-scheme
radius-scheme-name [ local ] }
undo authentication portal

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English