30
Syntax
domain if-unknown isp-domain-name
undo domain if-unknown
Default
No ISP domain is specified for users that include unknown domain names.
Views
System view
Predefined user roles
network-admin
Parameters
isp-domain-name: Specifies the ISP domain name, a case-insensitive string of 1 to 255 characters. The
name cannot contain the forward slash (/), backslash (\), vertical bar (|), quotation marks ("), colon (:),
asterisk (*), question mark (?), left angle bracket (<), right angle bracket (>), or at sign (@).
Usage guidelines
The device chooses an authentication domain for each user in the following order:
• The authentication domain specified for the access module.
• The ISP domain in the username.
• The default ISP domain of the device.
• The ISP domain configured for users that include unknown domain names.
If none of the previous domains is available, user authentication fails.
NOTE:
Support for the authentication domain confi
uration depends on the access module. You can specify an
authentication domain for 802.1X, portal, or MAC authentication.
Examples
# Specify ISP domain test for users that include unknown domain names.
<Sysname> system-view
[Sysname] domain if-unknown test
Related commands
display domain
session-time include-idle-time
Use session-time include-idle-time to configure the device to include the idle cut period (or the user
online detection interval for portal users) in the user online duration sent to the server.
Use undo session-time include-idle-time to restore the default.
Syntax
session-time include-idle-time
undo session-time include-idle-time
To Next Page
Loading...
Need help?
General
