470
Field Descri
tion
RAWIP sessions
Number of Raw IP sessions and number of Raw IP sessions in
different states.
Current relation-table entries Total number of relation entries.
Session establishment rate
Session establishment rate, and rates for establishing sessions of
different protocols.
Received TCP Number of received TCP packets and packet bytes.
Received UDP Number of received UDP packets and packet bytes.
Received ICMP Number of received ICMP packets and packet bytes.
Received ICMPv6 Number of received ICMPv6 packets and packet bytes.
Received UDP-Lite Number of received UDP-Lite packets and packet bytes.
Received SCTP Number of received SCTP packets and packet bytes.
Received DCCP Number of received DCCP packets and packet bytes.
Received RAWIP Number of received Raw IP packets and packet bytes.
display session table
Use display session table to display session entries.
Syntax
MSR1000/MSR2000/MSR3000:
display session table { ipv4 | ipv6 } [ source-ip source-ip ] [ destination-ip destination-ip ] [ verbose ]
MSR4000:
display session table { ipv4 | ipv6 } [ slot slot-number ] [ source-ip source-ip ] [ destination-ip
destination-ip ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4: Specifies IPv4 session entries.
ipv6: Specifies IPv6 session entries.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays the
session entries that match specific criteria on all cards. (MSR4000.)
source-ip source-ip: Specifies a source IP address. The source-ip argument specifies the source IP address
of a session from the initiator to the responder.
To Next Page
Loading...
Need help?
General
