599
ICMPv6 destination unreachable 1 0
ICMPv6 time exceeded 1 0
ICMPv6 parameter problem 1 0
ICMPv6 packet too big 1 0
Table 92 Command output
Field Descri
tion
AttackType Type of the attack.
AttackTimes Number of times that the attack occurred.
Dropped Number of dropped packets.
Related commands
reset attack-defense statistics local
display blacklist ip
Use display blacklist ip to display IPv4 blacklist entries.
Syntax
MSR1000/MSR2000/MSR3000:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] ] [ count ]
MSR4000:
display blacklist ip [ source-ip-address [ vpn-instance vpn-instance-name ] ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-ip-address: Specifies the IPv4 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv4 address belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not specify this
option if the IPv4 address is on the public network.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays IPv4
blacklist entries on all cards. (MSR4000.)
count: Displays the number of matching IPv4 blacklist entries.
Usage guidelines
If no parameter is specified, this command displays all IPv4 blacklist entries.
Examples
# (MSR1000/MSR2000/MSR3000.) Display all IPv4 blacklist entries.
<Sysname> display blacklist ip
To Next Page
Loading...
Need help?
General
