479
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies a card by its slot number. If no card is specified, this command clears session
statistics for all cards. (MSR4000.)
Examples
# Clear all session statistics.
<Sysname> reset session statistics
Related commands
display session statistics
reset session relation-table
Use reset session relation-table to clear relation entries.
Syntax
MSR1000/MSR2000/MSR3000:
reset session relation-table [ ipv4 | ipv6 ]
MSR4000:
reset session relation-table [ ipv4 | ipv6 ] [ slot slot-number ]
Views
User view
Predefined user roles
network-admin
Parameters
ipv4: Specifies IPv4 relation entries.
ipv6: Specifies IPv6 relation entries.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command clears the
relation entries on all cards. (MSR4000.)
Usage guidelines
If neither the IPv4 keyword nor the IPv6 keyword is specified, this command clears all IPv4 and IPv6
relation entries.
Examples
# Clear all IPv4 relation entries.
<Sysname> reset session relation-table ipv4
Related commands
display session relation-table
To Next Page
Loading...
Need help?
General
