608
Field Descri
tion
Port
Port protected by TCP client verification. If TCP client verification protects all
ports, this field displays any.
Type Type of the protected IPv6 address, Manual or Dynamic.
Requested Number of packets destined for the protected IPv6 address.
Trusted Number of packets that passed the client verification.
Related commands
client-verify protected ipv6
display client-verify trusted ip
Use display client-verify trusted ip to display trusted IPv4 addresses for client verification.
Syntax
MSR1000/MSR2000/MSR3000:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ] [ count ]
MSR4000:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dns: Specifies the DNS client verification function.
http: Specifies the HTTP client verification function.
tcp: Specifies the TCP client verification function.
ip-address: Specifies a trusted IPv4 address. If no IPv4 address is specified, this command displays all
matching trusted IPv4 addresses.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the trusted IPv4 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not specify
this option if the trusted IPv4 address is on the public network.
slot slot-number: Specifies a card by its slot number. If no card is specified, this command displays trusted
IPv4 addresses on all cards. (MSR4000.)
count: Displays the number of matching trusted IPv4 addresses.
Examples
# (MSR1000/MSR2000/MSR3000.) Display the trusted IPv4 list for DNS client verification.
<Sysname> display client-verify dns trusted ip
IP address VPN instance DS-Lite tunnel peer TTL(sec)
To Next Page
Loading...
Need help?
General
