HP MSR SERIES Command Reference

431
[Sysname-ssl-client-policy-policy1]
Related commands
display ssl client-policy
version
Use version to specify an SSL version for an SSL client policy.
Use undo version to restore the default.
Syntax
In non-FIPS mode:
version { ssl3.0 | tls1.0 }
undo version
In FIPS mode:
version tls1.0
undo version
Default
The SSL protocol version for an SSL client policy is TLS 1.0.
Views
SSL client policy view
Predefined user roles
network-admin
Parameters
ssl3.0: Specifies SSL 3.0.
tls1.0: Specifies TLS 1.0.
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify the SSL version for SSL client policy policy1 as TLS 1.0.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1] version tls1.0
Related commands
display ssl client-policy

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English