HP MSR SERIES Command Reference

358
Field Description
Outside VPN
VPN instance name of the MPLS L3VPN to which the receiving interface
belongs.
Inside VPN
VPN instance name of the MPLS L3VPN to which the protected data
belongs.
Profile
Name of the matching IKE profile found in the IKE SA negotiation.
If no matching profile is found, this field displays nothing.
Transmitting entity Role of the IKE negotiation entity: Initiator or Responder.
Local IP IP address of the local gateway.
Local ID type Identifier type of the local gateway.
Local ID Identifier of the local gateway.
Remote IP IP address of the remote gateway.
Remote ID type Identifier type of the remote gateway.
Remote ID Identifier of the remote security gateway.
Authentication-method Authentication method used by the IKE proposal.
Authentication-algorithm
Authentication algorithm used by the IKE proposal:
• MD5—HMAC-MD5 algorithm.
• SHA1—HMAC-SHA1 algorithm.
Encryption-algorithm Encryption algorithm used by the IKE proposal.
Life duration(sec) Lifetime of the IKE SA in seconds.
Remaining key duration(sec) Remaining lifetime of the IKE SA in seconds.
Exchange-mode IKE negotiation mode in phase 1: main mode or aggressive mode.
Diffie-Hellman group DH group used for key negotiation in IKE phase 1.
NAT traversal Whether NAT traversal is detected.
dpd
Use dpd to enable the device to send DPD messages.
Use undo dpd to disable the IKE DPD function.
Syntax
dpd interval interval-seconds [ retry seconds ] { on-demand | periodic }
undo dpd interval
Default
IKE DPD is disabled.
Views
IKE profile view
Predefined user roles
network-admin

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English