HP MSR SERIES Command Reference

206
Related commands
• display port-security
• port-security mac-address security
port-security timer disableport
Use port-security timer disableport to set the silence period during which the port remains disabled.
Use undo port-security timer disableport to restore the default.
Syntax
port-security timer disableport time-value
undo port-security timer disableport
Default
The port silence period is 20 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time-value: Specifies the silence period in seconds during which the port remains disabled. The value is
in the range of 20 to 300.
Usage guidelines
If you configure the intrusion protection action as disabling the port temporarily whenever the port
receives an illegal frame, use this command to set the silence period.
Examples
# Configure the intrusion protection action on port GigabitEthernet 2/1/1 as disabling the port
temporarily, and set the port silence period to 30 seconds.
<Sysname> system-view
[Sysname] port-security timer disableport 30
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] port-security intrusion-mode disableport-temporarily
Related commands
• display port-security
• port-security intrusion-mode

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English