450
l2c-connect Pre-defined 0x000009b6 No No
l2c-info Pre-defined 0x000009b7 No No
l2tp Pre-defined 0x000009b8 Yes No
l3-exprt Pre-defined 0x000009b9 No No
l3-hawk Pre-defined 0x000009ba No No
# Display information about the application protocol Telnet.
<Sysname> display application name telnet
Application name: telnet
Application ID: 0x000012b7
Tunnel: No
Encrypted: No
Table 58 Command output
Field Description
Total count Total number of application protocols.
Pre-defined count Number of pre-defined application protocols.
User-defined count Number of user-defined application protocols.
Application name Name of the application protocol.
Type
Attribute of the application protocol:
• Pre-defined.
• User-defined.
App ID/Application ID ID of the application protocol.
Tunnel
Whether or not the protocol is a tunnel protocol:
• Yes.
• No.
Encrypted
Whether or not the protocol is a cryptographic
protocol:
• Yes.
• No.
Related commands
• app-group
• include
display application statistics
Use display application statistics to display statistics for the specified application protocols.
Syntax
display application statistics [ direction { inbound | outbound } | interface interface-type
interface-number | name application-name ] *
To Next Page
Loading...
Need help?
General
