HP MSR SERIES Command Reference

621
Use undo fin-flood detect non-specific to restore the default.
Syntax
fin-flood detect non-specific
undo fin-flood detect non-specific
Default
FIN flood attack detection is not enabled for non-specific IP addresses.
Views
Attack defense policy view
Predefined user roles
network-admin
Usage guidelines
This command enables global FIN flood attack detection. It applies to all IP addresses except for those
specified by the fin-flood detect command. The system uses the global trigger threshold set by the
fin-flood threshold command and global actions specified by the fin-flood action command.
Examples
# Enable FIN flood attack detection for non-specific IP addresses in attack defense policy atk-policy-1.
<Sysname> system-view
[Sysname] attack-defense policy atk-policy-1
[Sysname-attack-defense-policy-atk-policy-1] fin-flood detect non-specific
Related commands
• fin-flood action
• fin-flood detect
• fin-flood threshold
fin-flood threshold
Use fin-flood threshold to set the global threshold for triggering FIN flood attack prevention.
Use undo fin-flood threshold to restore the default.
Syntax
fin-flood threshold threshold-value
undo fin-flood threshold
Default
The global threshold is 1000 for triggering FIN flood attack prevention.
Views
Attack defense policy view
Predefined user roles
network-admin

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English