311
Authentication failure: 0
Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 0
MTU check failure: 0
Loopback limit exceeded: 0
Crypto speed limit exceeded: 0
Table 41 Command output
Field Description
Received/sent packets Number of received/sent IPsec-protected packets.
Received/sent bytes Number of bytes of received/sent IPsec-protected packets.
Dropped packets (received/sent) Number of dropped IPsec-protected packets (received/sent).
No available SA Number of packets dropped due to lack of available IPsec SA.
Wrong SA Number of packets dropped due to wrong IPsec SA.
Invalid length Number of packets dropped due to invalid packet length.
Authentication failure Number of packets dropped due to authentication failure.
Encapsulation failure Number of packets dropped due to encapsulation failure.
Decapsulation failure Number of packets dropped due to decapsulation failure.
Replayed packets Number of dropped replayed packets.
ACL check failure Number of packets dropped due to ACL check failure.
MTU check failure Number of packets dropped due to MTU check failure.
Loopback limit exceeded Number of packets dropped due to loopback limit exceeded.
Crypto speed limit exceeded Number of packets dropped due to crypto speed limit exceeded.
Related commands
reset ipsec statistics
display ipsec transform-set
Use display ipsec transform-set to display information about IPsec transform sets.
Syntax
display ipsec transform-set [ transform-set-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
To Next Page
Loading...
Need help?
General
