298
[Sysname-ipsec-transform-set-tran1] ah authentication-algorithm sha1
description
Use description to configure description for an IPsec policy, IPsec policy template, or IPsec profile.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is defined.
Views
IPsec policy view, IPsec policy template view, IPsec profile view
Predefined user roles
network-admin
Parameters
text: Specifies the description content, a case-sensitive string of 1 to 80 characters.
Usage guidelines
If the system has multiple IPsec policies, IPsec policy templates, or IPsec profiles, you can use this
command to configure different descriptions for them to distinguish them.
Examples
# Configure description for IPsec policy 1 as CenterToA.
<Sysname> system-view
[Sysname] ipsec policy policy1 1 isakmp
[Sysname-ipsec-policy-isakmp-policy1-1] description CenterToA
display ipsec { ipv6-policy | policy }
Use display ipsec { ipv6-policy | policy } to display information about IPsec policies.
Syntax
display ipsec { ipv6-policy | policy } [ policy-name [ seq-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv6-policy: Displays information about IPv6 IPsec policies.
policy: Displays information about IPv4 IPsec policies.
To Next Page
Loading...
Need help?
General
