42
hash: Sets a hashed password.
simple: Sets a plaintext password.
password: Specifies the password string. This argument is case sensitive.
• In non-FIPS mode:
{ A cipher password is a string of 1 to 117 characters.
{ A hashed password is a string of 1 to 110 characters.
{ A plaintext password is a string of 1 to 63 characters.
• In FIPS mode, the password is a plaintext string of 15 to 63 characters. The string must contain digits,
uppercase letters, lowercase letters, and special characters (see "Password control commands").
Usage guidelines
If you do not specify any of the parameters or if the device operates in FIPS mode, you enter the
interactive mode to set a plaintext password. Only device management users support passwords
configured in interactive mode.
In non-FIPS mode, a non-password-protected user passes authentication if the user provides the correct
username and passes attribute checks. To enhance security, configure a password for each local user. In
FIPS mode, only password-protected users can pass authentication.
Device management users support plaintext and hashed passwords. Network access users support
plaintext and ciphertext passwords. For security purposes, all passwords, including passwords
configured in plain text, are saved in ciphertext, hashed or encrypted.
Examples
# Set the password of the device management user user1 to 123456TESTplat&! in plain text.
<Sysname> system-view
[Sysname] local-user user1 class manage
[Sysname-luser-manage-user1] password simple 123456TESTplat&!
# Set the password of the device management user test in interactive mode.
<Sysname> system-view
[Sysname] local-user test class manage
[Sysname-luser-manage-test] password
Password:
Confirm :
# Set the password of the network access user user2 to 123456 TESTuser& ! in plain text.
<Sysname> system-view
[Sysname] local-user user2 class network
[Sysname-luser-network-user2] password simple 123456TESTuser&!
Related commands
• display local-user
• local-user password-display-mode
service-type
Use service-type to specify the service types that a local user can use.
Use undo service-type to delete service types configured for a local user.
To Next Page
Loading...
Need help?
General
