573
Field Descri
tion
Dropped Number of attack packets dropped by the interface or the device.
Totally 2 flood entries Total number of IPv4 addresses that are protected.
display attack-defense flood statistics ipv6
Use display attack-defense flood statistics ipv6 to display flood attack detection and prevention statistics
for a protected IPv6 address.
Syntax
MSR1000/MSR2000/MSR3000:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood | rst-flood
| syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn vpn-instance-name ] ]
[ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense { ack-flood | dns-flood | fin-flood | flood | http-flood | icmpv6-flood | rst-flood
| syn-ack-flood | syn-flood | udp-flood } statistics ipv6 [ ipv6-address [ vpn vpn-instance-name ] ]
[ interface interface-type interface-number | local ] [ slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ack-flood: Specifies ACK flood attack.
dns-flood: Specifies DNS flood attack.
fin-flood: Specifies FIN flood attack.
flood: Specifies all IPv4 flood attacks.
http-flood: Specifies HTTP flood attack.
icmpv6-flood: Specifies ICMPv6 flood attack.
rst-flood: Specifies RST flood attack.
syn-ack-flood: Specifies SYN-ACK flood attack.
syn-flood: Specifies SYN flood attack.
udp-flood: Specifies UDP flood attack.
ipv6-address: Specifies an IPv6 address. If no IPv6 address is specified, this command displays flood
attack detection and prevention statistics for all IPv6 addresses.
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
To Next Page
Loading...
Need help?
General
