494
If you specify none of the source source-ip, destination destination-ip, and service-port port-number
options, this command displays statistics about all IPv6 connections that match connection limit rules.
Examples
# (MSR1000/MSR2000/MSR3000.) Display statistics about all IPv6 connections that match the
connection limit rule on GigabitEthernet 2/1/1.
<Sysname> display connection-limit ipv6-stat-nodes interface gigabitethernet 2/1/1
Src IP address : Any
VPN instance : vpn5
Dst IP address : fe80::5ed9:98ff:feb1:69b6
VPN instance : abcdefghijklmnopqrstuvwxyzabcde
Service : tcp/12345
Limit rule ID : 12345(ACL: 3184)
Sessions threshold Hi/Lo: 1000000/90000
Sessions count : 150000
New session flag : Permit
# (MSR1000/MSR2000/MSR3000.) Display statistics about all IPv6 connections that match the
connection limit rule on VLAN-interface 2.
<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 2
Src IP address : Any
VPN instance : vpn5
Dst IP address : fe80::5ed9:98ff:feb1:69b6
VPN instance : abcdefghijklmnopqrstuvwxyzabcde
Service : tcp/12345
Limit rule ID : 12345(ACL: 3184)
Sessions threshold Hi/Lo: 1000000/90000
Sessions count : 150000
New session flag : Permit
# (MSR4000.) Display statistics about all IPv6 connections that match the connection limit rule on
VLAN-interface 10 on the card in slot 2.
<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 10 slot 2
Slot 2:
Src IP address : 112::2
VPN instance : --
Dst IP address : Any
VPN instance : --
Service : udp/300
Limit rule ID : 0(ACL: 3571)
Sessions threshold Hi/Lo: 3000/2900
Sessions count : 2002
New session flag : Permit
# (MSR1000/MSR2000/MSR3000.) Display the number of limit rule-based statistics sets by source IP
address 2::1.
<Sysname> display connection-limit ipv6-stat-nodes global source 2::1 count
Current limit statistic nodes count is 16.
# (MSR4000.) Display the number of limit rule-based statistics sets on VLAN-interface 10 on the card in
slot 2.