116 Call Home Configuration
Resetting the Call Home database
There are two ways to reset the Call Home database. To clear all Callhome profiles, enter the
callhome clear command, as shown in the following example. This command does not affect the Call
Home service configuration.
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> callhome edit
SN6000 FC Switch (admin-callhome) #> callhome clear
SN6000 FC Switch (admin-callhome) #> callhome save
The CallHome database profiles will be saved and activated.
Please confirm (y/n): [n] y
To clear all Call Home profiles and reset the Call Home service configuration to the factory defaults, enter
the reset callhome command, as shown in the following example:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> reset callhome
The callhome configuration will be reset and the default values activated.
Please confirm (y/n): [n] y
Reset and activation in progress ....
To Next Page
Loading...
Need help?
General