HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 21
3 Network Configuration
Network configuration consists of the IP parameters that identify the switch in the network and provide for
IP security. This section describes the network configuration tasks.
Displaying the network configuration
The show fabric command displays IP addresses (Enet IP Addr) for all switches in the fabric, as
shown in the following example.
SN6000 FC Switch #> show fabric
Domain *133(0x85)
WWN 10:00:00:c0:dd:0d:53:91
SymbolicName SN6000 FC Switch
HostName <undefined>
EthIPv4Address 10.20.116.133
EthIPv6Address <undefined>
* indicates principal switch
The show setup system command displays the entire switch network configuration, which includes the
following:
• IP configurations (versions 4 and 6)
• DNS server configuration
To display specific information, add the corresponding keyword. For example, to display IPv6
configuration information, enter the show setup system ipv6 command:
SN6000 FC Switch #> show setup system ipv6
System Information
------------------
EthIPv6NetworkEnable False
EthIPv6NetworkDiscovery Static
EthIPv6NetworkAddress 2001::1/64
EthIPv6GatewayAddress fe80::1

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English