HP StorageWorks SN6000 Command Line Interface Guide

296 Command Reference
uptime
Description Displays the elapsed up time since the switch was last reset and the reset method. A hot reset or
non-disruptive firmware activation does not reset the elapsed up time reported by this command.
Authority None
Syntax
uptime
Examples The following is an example of the uptime command:
SN6000 FC Switch #> uptime
Elapsed up time : 0 day(s), 2 hour(s), 28 min(s), 44 sec(s)
Reason last reset: NormalReset

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English