HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 271
show setup system
Description Displays network, logging, NTP server, and timer parameters on the switch.
Authority None
Syntax
show setup system
dns
ipv4
ipv6
logging
ntp
timers
Operands
dns
Displays DNS host name configuration parameters. To display all system configuration
parameters, omit the operand. See Table 52 for descriptions of the DNS host name configuration
parameters.
ipv4
Displays switch IPv4 Ethernet configuration parameters. To display all system configuration
parameters, omit the operand. See Table 53 for descriptions of the IPv4 Ethernet configuration
parameters.
ipv6
Displays switch IPv6 Ethernet configuration parameters. To display all system configuration
parameters, omit the operand. See Table 54 for descriptions of the IPv6 Ethernet configuration
parameters.
logging
Displays event logging configuration parameters. To display all system configuration parameters,
omit the operand. See Table 55 for descriptions of the event logging configuration parameters.
ntp
Displays NTP server configuration parameters. To display all system configuration parameters,
omit the operand. See Table 56 for descriptions of the NTP server configuration parameters.
timers
Displays timer configuration parameters. To display all system configuration parameters, omit the
operand. See Table 57 for descriptions of the timer configuration parameters.
Examples The following is an example of the show setup system dns command:
SN6000 FC Switch #> show setup system dns
System Information
------------------
DNSClientEnabled False
DNSLocalHostname <undefined>
DNSServerDiscovery Static
DNSServer1Address <undefined>
DNSServer2Address <undefined>
DNSServer3Address <undefined>
DNSSearchListDiscovery Static
DNSSearchList1 <undefined>
DNSSearchList2 <undefined>
DNSSearchList3 <undefined>
DNSSearchList4 <undefined>
DNSSearchList5 <undefined>
To Next Page
Loading...
Need help?
General