HP StorageWorks SN6000 Command Line Interface Guide

194 Command Reference
set beacon
Description Enables or disables the flashing of the Logged-In LEDs for the purpose of locating a switch.
Authority None
Syntax
set beacon [state]
Operands
[state]
Table 32 describes the beacon state parameters.
Table 32 Beacon state parameters
Parameter Description
on Enables the flashing beacon.
off Disables the flashing beacon.
Examples The following is an example of the set beacon command:
SN6000 FC Switch #> set beacon on

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English