HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 263
MediaType Media physical variant. The variant indicates speed, media, transmitter,
and distance. The media designator may be M5 (multimode 50
micron), M6 (multimode 62.5 micron), or MX. MX indicates that the
media supports both multimode 50 and 62.5 micron.
MediaVendor Transceiver manufacturer
MediaVendorID Transceiver manufacturer identifier
OperationalState Operational state
PerfTuningMode AutoPerfTuning status
PortID Fibre Channel port address
PortWWN Worldwide port name
PrimSeqErrors Number of primitive sequence errors detected
RunningType Operational port type: F, FL, E, TR, or Unknown
RxLinkResets Number of link reset primitives received from an attached device.
RxOfflineSeq Number of offline sequences (OLSs) received. An OLS is issued for link
initialization, a Receive & Recognize Not_Operational (NOS) state, or
to enter the offline state.
ShortFramesIn Number of incidents when one or more frames that are less than the
minimum size were received
SymbolicName Symbolic name of the port
SyncStatus Synchronization status: SyncAcquired, SyncLost
TestFaultCode Fault code from the most recent port test
TestStatus Status from the most recent port test: Passed, Failed, NeverRun
TotalErrors Total number of errors detected on the port since the last port or switch
reset
TotalLinkResets Total number of link resets since the last port or switch reset
TotalLIPsRecvd Number of loop initialization primitive frames received by this port
TotalLIPsXmitd Number of loop initialization primitive frames transmitted by this port
TotalOfflineSeq Total number of offline sequences issued and received by this port
TotalRxFrames Total number of frames received by this port
TotalRxWords Total number of words received by this port
TotalTxFrames Total number of frames issued by this port
TotalTxWords Total number of words issued by this port
TxLinkResets Number of link resets issued by this port
TxOfflineSeq Number of offline sequences issued by this port
XmitterEnabled Transmitter status: True, False.
Table 64 Show port display entries (continued)
Parameter Description