230 Command Reference
set timezone
Description Specifies the time zone for the switch and the workstation. The default is Universal Time (UTC), also
known as Greenwich Mean Time (GMT). This command prompts you to choose a region, then a
subregion to specify the time zone. Changing the time zone converts the time to the time in the new
time zone.
Authority Admin session
Syntax
set timezone
Examples The following is an example of the set timezone command:
SN6000 FC Switch (admin) #> set timezone
Africa America
Antarctica Asia
Atlantic Australia
Europe Indian
Pacific UTC
Press ENTER for more options or 'q' to make a selection.
America/Grenada America/Guadeloupe
America/Guatemala America/Guayaquil
America/Guyana America/Halifax
America/Havana America/Hermosillo
America/Indiana America/Indianapolis
.
.
.
America/Monterrey America/Montevideo
America/Montreal America/Montserrat
America/Nassau America/New_York
America/Nipigon America/Nome
America/Noronha America/North_Dakota
America/Panama America/Pangnirtung
Press ENTER for more options or 'q' to make a selection.
q
Enter selection (or 'q' to quit): america/north_dakota
America/North_Dakota/Center
Enter selection (or 'q' to quit): america/north_dakota/center
See also date, page 141
show timezone, page 279
To Next Page
Loading...
Need help?
General