HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 127
alias
Description Creates a named set of ports/devices. Aliases make it easier to assign a set of ports/devices to
many zones. An alias can not have a zone or another alias as a member.
Authority Admin session and Zoning Edit session for all operands except list and members
Syntax
alias
add [alias] [member_list]
copy [alias_source] [alias_destination]
create [alias]
del
ete [alias]
list
members [alias]
remove [alias] [member_list]
rename [alias_old] [alias_new]
Operands
add [alias] [member_list]
Specifies one or more ports/devices given by [member_list] to add to the alias named [alias].
Use a <space> to delimit ports/devices in [member_list]. An alias can have a maximum of 2,000
members. A port/device in [member_list] can have any of the following formats:
• Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–239; port
numbers can be 0–255.
• 6-character hexadecimal device Fibre Channel address (hex)
• 16-character hexadecimal Worldwide Port Name (WWPN) with the format
xx:xx:xx:xx:xx:xx:xx:xx.
The application verifies that the [alias] format is correct, but does not validate that such a
port/device exists.
copy [alias_source] [alias_destination]
Creates a new alias named [alias_destination] and copies the membership into it from the alias
given by [alias_source].
create [alias]
Creates an alias with the name given by [alias]. An alias name must begin with a letter and be
no longer than 64 characters. Valid characters are 0–9, A–Z, a–z, _, $, ^, and -. The zoning
database supports a maximum of 256 aliases.
delete [alias]
Deletes the specified alias given by [alias] from the zoning database. If the alias is a member of
the active zone set, the alias will not be removed from the active zone set until the active zone set
is deactivated.
list
Displays a list of all aliases. This operand does not require an Admin session.
members [alias]
Displays all members of the alias given by [alias]. This operand does not require an Admin
session.
remove [alias] [member_list]
Removes the ports/devices given by [member_list] from the alias given by [alias]. Use a <space>
to delimit ports/devices in [member_list]. A port/device in [member_list] can have any of
the following formats:
• Domain ID and port number pair (Domain ID, Port Number). Domain IDs can be 1–239; port
numbers can be 0–255.
• 6-character hexadecimal device Fibre Channel address (hex)
• 16-character hexadecimal WWPN for the device with the format xx:xx:xx:xx:xx:xx:xx:xx.
rename [alias_old] [alias_new]
Renames the alias given by [alias_old] to the alias given by [alias_new].

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English