HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 213
set setup radius
Description Configures RADIUS servers on the switch.
Authority Admin session
Syntax
set setup radius
common
server [server_number]
Operands
common
Prompts you in a line-by-line fashion to configure attributes that are common to all RADIUS
servers. To configure common and server-specific attributes, omit the operand. Table 47
describes the common RADIUS server configuration attributes.
Table 47 Common RADIUS server configuration attributes
Attribute Description
DeviceAuthOrder Authenticator priority for devices:
• Local: Authenticate devices using only the local security database.
This is the default.
• Radius: Authenticate devices using only the security database on the
RADIUS server.
• RadiusLocal: Authenticate devices using the RADIUS server security
database first. If the RADIUS server is unavailable, then use the local
switch security database.
UserAuthOrder Authenticator priority for user accounts:
• Local: Authenticate users using only the local security database. This
is the default.
• Radius: Authenticate users using only the security database on the
RADIUS server.
• RadiusLocal: Authenticate users using the RADIUS server security
database first. If the RADIUS server is unavailable, then use the local
switch security database.
TotalServers Number of RADIUS servers to configure during this session. Setting
TotalServers to 0 disables all RADIUS authentication. The default is 0.
Operands
server [server_number]
Prompts you in a line-by-line fashion to configure attributes for the RADIUS server given by
[server_number]. [server_number] is a positive integer. To configure common and specific
RADIUS server parameters, omit the operand. Table 48 describes the server-specific RADIUS
server configuration attributes.
Table 48 Server-specific RADIUS server configuration attributes
Attribute Description
ServerIPAddress IP address (version 4 or 6) or DNS host name of the RADIUS server. The
default is 10.0.0.1.
ServerUDPPort User Datagram Protocol (UDP) port number on the RADIUS server. The
default is 1812.
DeviceAuthServer Enable (True) or disable (False) this server for device authentication.
The default is False.

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English