HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 89
To display the name of the active security set and its activation history, enter the securityset active
command, as shown in the following example:
SN6000 FC Switch #> securityset active
Active SecuritySet Information
------------------------------
ActiveSecuritySet alpha
LastActivatedBy Remote
LastActivatedOn day month date time year
Security set membership information
The securityset groups and group securitysets commands display security set membership
information.
To display the member groups for a specified security set, enter the securityset groups command, as
shown in the following example:
SN6000 FC Switch #> securityset groups alpha
Current list of Groups for SecuritySet: alpha
---------------------------------------
group1 (ISL)
group2 (Port)
To display the security sets for which a specified group is a member, enter the group securitysets
command, as shown in the following example:
SN6000 FC Switch #> group securitysets group_1
Current list of SecuritySets for Group: group_1
---------------------------------------
SecuritySet_1
SecuritySet_2
SecuritySet_A
SecuritySet_B
Group membership information
To display the members for a specified group, enter the group members command, as shown in the
following example:
SN6000 FC Switch #> group members group_1
Current list of members for Group: group_1
----------------------------------
10:00:00:c0:dd:00:71:ed
10:00:00:c0:dd:00:72:45
10:00:00:c0:dd:00:90:ef
10:00:00:c0:dd:00:b8:b7
To Next Page
Loading...
Need help?
General