HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 303
zoneset
Description Manages zone sets and component zones across the fabric.
Authority Admin session and a Zoning Edit session. See the zoning edit command. The active, list,
and zones operands are available without an Admin session. You must close the Zoning Edit
session before using the activate and deactivate operand.
Syntax
zoneset
activate [zone_set]
active
add [zone_set] [zone_list]
copy [zone_set_source] [zone_set_destination]
create [zone_set]
deact
ivate
del
ete [zone_set]
list
remove [zone_set] [zone_list]
rename [zone_set_old] [zone_set_new]
zones [zone_set]
Operands
activate [zone_set]
Activates the zone set given by [zone_set]. This operand deactivates the active zone set. Close
the Zoning Edit session before using this operand.
active
Displays the name of the active zone set. This operand does not require Admin session.
add [zone_set] [zone_list]
Adds a list of zones and aliases given by [zone_list] to the zone set given by [zone_set]. Use a
<space> to delimit zone and alias names in [zone_list]. You must enter the zoning save
command to save your changes.
copy [zone_set_source] [zone_set_destination]
Creates a new zone set named [zone_set_destination] and copies into it the zones from the zone
set given by [zone_set_source]. You must enter the zoning save command to save your
changes.
create [zone_set]
Creates the zone set with the name given by [zone_set]. A zone set name must begin with a letter
and be no longer than 64 characters. Valid characters are alphanumeric, _, $, ^, and -. The
zoning database supports a maximum of 256 zone sets. You must enter the zoning save
command to save your changes.
deactivate
Deactivates the active zone set. Close the Zoning Edit session before using this operand.
delete [zone_set]
Deletes the zone set given by [zone_set]. If the specified zone set is active, the command is
suspended until the zone set is deactivated. You must enter the zoning save command to save
your changes.
list
Displays a list of all zone sets. This operand does not require an Admin session.
remove [zone_set] [zone_list]
Removes a list of zones given by [zone_list] from the zone set given by [zone_set]. Use a
<space> to delimit zone names in [zone_list]. If [zone_set] is the active zone set, the zone will
not be removed until the zone set has been deactivated. You must enter the zoning save
command to save your changes.

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English