HP StorageWorks SN6000 Command Line Interface Guide

132 Command Reference
capture
Description Manages the data capture configuration for the Tech_Support_Center Call Home profile. The data
capture configuration determines the time and frequency by which status and trend data are
collected from the switch and sent to recipients specified in the Tech_Support_Center profile.
Authority Admin session and Callhome Edit session. For information about starting a Callhome Edit session,
see the callhome command.
Syntax
capture
add
edit
remove
Operands
add
Adds data capture instructions to the Tech_Support_Center profile. Table 7 describes the data
capture parameters.
Table 7 Data capture configuration parameters
Parameter Description
TimeOfDay Time of day to send status and trend data to the
Tech_Support_Center profile email recipients. The format is hh:mm
on a 24-hour clock. The default 02:00.
DayOfWeek Day of the week to send status and trend data to the
Tech_Support_Center profile email recipients. Values can be Sun,
Mon, Tue, Wed, Thur, Fri, Sat. The default is Sat.
Interval Number of weeks between data-capture emails to the
Tech_Support_Center profile email recipients. Values can be 1–26.
The default is 1.
edit
Opens an edit session in which to modify the data capture configuration of the
Tech_Support_Center profile. See Table 7 for a description of the data capture configuration
parameters.
remove
Removes the data capture configuration from the Test_Support_Center profile.

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English