HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 145
feature
Description Adds license key features to the switch and displays the license key feature log. To order a license
key, contact your switch distributor or your authorized reseller. Upgrading a switch is not disruptive,
nor does it require a switch reset.
Authority Admin session for add operand only
Syntax
feature
add [license_key]
log
Operands
add [license_key]
Adds the feature that corresponds to the value given by [license_key]. [license_key] is case
insensitive.
log
Displays a list of installed license key features.
Notes • The HP StorageWorks SN6000 Stackable 20Gb ISL Upgrade LTU enables the XPAK ports to
transmit at 20 Gb/s instead of the default 10 Gb/s.
• The HP StorageWorks SN6000 Stackable 4-port FC Switch Upgrade LTU enables additional SFP
ports in increments of four on the HP StorageWorks SN6000 Stackable 8Gb 12-port Single
Power FC Switch for totals of 16, 20, or 24 ports.
Examples The following is an example of the feature add command:
SN6000 FC Switch #> admin start
SN6000 FC Switch (admin) #> feature add 1-LCVXOWUNOJBE6
License upgrade to 20 Gb
Do you want to continue with license upgrade procedure? (y/n): [n] y
Alarm Msg:[day mon date time year]8400.0045][SM][License 20Gb/s capability]
The following is an example of the feature log command:
SN6000 FC Switch #> feature log
Mfg Feature Log:
----------------
No 20G capability
Customer Feature Log:
---------------------
1) day month date 19:39:24 year - 20 Gb/s capability
1-LCVXOWUNOJBE6
To Next Page
Loading...
Need help?
General