60 Port Configuration
Port performance
To display port performance in terms of the volume of data transmitted, data received, or errors, enter the
show perf command. You can display continuous live performance information for one or more ports, or
an instantaneous summary. The following example displays an instantaneous summary in bytes and
frames. Values are expressed in thousands (K) and millions (M) of bytes or frames per second.
SN6000 FC Switch #> show perf
Port Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Number (in) (out) (total) (in) (out) (total)
------ ------- ------- ------- -------- -------- --------
0 7K 136M 136M 245 68K 68K
1 58K 0 58K 1K 0 1K
2 0 0 0 0 0 0
3 0 0 0 0 0 0
4 0 0 0 0 0 0
5 0 0 0 0 0 0
6 0 7K 7K 0 245 245
7 136M 58K 136M 68K 1K 70K
8 7K 136M 136M 245 68K 68K
9 58K 0 58K 1K 0 1K
10 0 0 0 0 0 0
11 0 0 0 0 0 0
12 0 0 0 0 0 0
13 0 0 0 0 0 0
14 0 7K 7K 0 245 245
15 136M 58K 136M 68K 1K 70K
16 47M 23K 47M 23K 726 24K
17 0 0 0 0 0 0
18 23K 47M 47M 726 23K 24K
19 0 0 0 0 0 0
20 0 0 0 0 0 0
21 0 0 0 0 0 0
22 0 0 0 0 0 0
23 0 0 0 0 0 0
Transceiver information
Enter the show media command to display operational information about a transceiver, as shown in the
following example. For a description of the transceiver information in the show media display, see
Table 62.
SN6000 FC Switch #> show media 4
Port Number: 4
-------------
MediaType 800-MX-SN-S
MediaVendor FINISAR CORP.
MediaPartNumber FTLF8528P2BNV
MediaRevision A
MediaSerialNumber P6G22RL
MediaSpeeds 2Gb/s, 4Gb/s, 8Gb/s
Temp Voltage Tx Bias Tx Pwr Rx Pwr
(C) (V) (mA) (mW) (mW)
----------- ----------- ------------ ----------- -----------
Value 37.32 3.33 7.30 0.373 0.000
Status Normal HighWarning Normal Normal LowAlarm
HighAlarm 95.00 3.90 17.00 0.637 1.264
HighWarning 90.00 3.70 14.00 0.637 0.791
LowWarning -20.00 2.90 2.00 0.082 0.028
LowAlarm -25.00 2.70 1.00 0.073 0.019
To Next Page
Loading...
Need help?
General