HP StorageWorks SN6000 Command Line Interface Guide

HP StorageWorks SN6000 Fibre Channel Switch Command Line Interface Guide 59
FlowErrors 0 TotalOfflineSeq 1
FReject 0 TotalRxFrames 4432
InvalidCRC 0 TotalRxWords 300995
InvalidDestAddr 0 TotalTxFrames 28640
LIP_AL_PD_AL_PS 0 TotalTxWords 483225
LIP_F7_AL_PS 0 TxLinkResets 0
LIP_F7_F7 2 TxOfflineSeq 1
LIP_F8_AL_PS 0
Port threshold alarm configuration parameters
To display the port threshold alarm parameters, enter the show config threshold command. These
parameters determine the error thresholds at which the switch issues alarms. See Table 37 for descriptions
of these parameters.
SN6000 FC Switch #> show config threshold
Configuration Name: default
------------
Threshold Configuration Information
-----------------------------------
ThresholdMonitoringEnabled False
CRCErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 1
SampleWindow 10
DecodeErrorsMonitoringEnabled True
RisingTrigger 25
FallingTrigger 0
SampleWindow 10
ISLMonitoringEnabled True
RisingTrigger 2
FallingTrigger 0
SampleWindow 10
LoginMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LogoutMonitoringEnabled True
RisingTrigger 5
FallingTrigger 1
SampleWindow 10
LOSMonitoringEnabled True
RisingTrigger 100
FallingTrigger 5
SampleWindow 10

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English