HP StorageWorks SN6000 Command Line Interface Guide

292 Command Reference
test status
Description Displays the status of a test in progress, or if there is no test in progress, the status of the last test that
was executed.
Authority None
Syntax
test status
port [port_number]
switch
Operands
port [port_number]
Display test status for the port given by [port_number]. [port_number] can be 0–23.
switch
Display test status for the switch: Passed, Failed, NeverRun.
Examples The following is an example of the test status port command:
SN6000 FC Switch (admin) #> test status port 1
Port Test Test Loop Test
Num Port Type Status Count Failures
---- -------- ---- ------ ----- --------
1 1 Offline Internal Passed 12 0
The following is an example of the test status switch command:
SN6000 FC Switch #> test status switch
Test Test Test Loop Test
Level Type Status Count Failures
----- ---- ------ ----- --------
Switch Offline internal Passed 4 0
Port Test Test Loop Test
Num Type Status Count Failures
---- ---- ------ ----- --------
0 Offline internal Passed 4 0
1 Offline internal Passed 4 0
2 Offline internal Passed 4 0
3 Offline internal Passed 4 0
4 Offline internal Passed 4 0
5 Offline internal Passed 4 0
6 Offline internal Passed 4 0
7 Offline internal Passed 4 0
8 Offline internal Passed 4 0
9 Offline internal Passed 4 0
10 Offline internal Passed 4 0
11 Offline internal Passed 4 0
12 Offline internal Passed 4 0
13 Offline internal Passed 4 0
14 Offline internal Passed 4 0
15 Offline internal Passed 4 0
16 Offline internal Passed 4 0
17 Offline internal Passed 4 0
18 Offline internal Passed 4 0
19 Offline internal Passed 4 0
20 Offline internal Passed 4 0
21 Offline internal Passed 4 0
22 Offline internal Passed 4 0
23 Offline internal Passed 4 0

HP StorageWorks SN6000 Specifications

General

Brand	HP
Model	StorageWorks SN6000
Category	Switch
Language	English